Welcome to Live Appliances Service

Washer Dryer Combo Installation

  • Home
  • Washer Dryer Combo Installation

Washer Dryer Combo Installation

Here’s a general guide for installing a washer dryer combo:

  • Read the Manual:
    • Start by thoroughly reading the installation manual provided by the manufacturer.
  • Location:
    •  Choose a suitable location for the washer dryer combo, ensuring it’s on a level surface.
  • Ventilation:
    • If your combo unit has a vent for drying, determine whether it needs to be vented externally or if it has a ventless option.
  • Power Supply:
    •  Ensure the power supply matches the combo unit’s requirements.
    • Plug the unit into a grounded electrical outlet.
  • Water Supply:
    •  Connect the combo unit to the water supply using the provided hoses.
    •  Ensure the hot and cold water connections are correct.
  • Drain Hose:
    •  Connect the drain hose to the drainage system.
    • Make sure the hose is not kinked and allows for proper drainage.
  • Vent Hose (If Applicable):
    • If the unit requires venting, connect the vent hose following the manufacturer’s instructions.
  • Secure Hoses:
    •  Securely fasten all hoses to prevent leaks during operation.
  • Leveling:
    • Adjust the unit’s feet to ensure it is level and stable.
  • Test Run:
    • Run a short test cycle to check for any water leaks and ensure both washing and drying functions operate smoothly.
  • Final Checks:
    • Verify that all buttons and controls are functioning correctly.
    • Confirm that the door (if front-loading) opens and closes properly.

Always refer to the specific instructions provided by the manufacturer for your washer dryer combo model. If you encounter difficulties or are uncertain about any step, consider consulting a professional installer or contacting the manufacturer’s customer support for assistance.