| Error Code | Meaning | Solution |
|---|---|---|
| LOC, LC | Control lock activated | Press the control lock button. Some models require you to press and hold the button, while others require a single press. |
| dET | Detergent cartridge was not detected | Ensure the cartridge is inserted into the dispenser drawer correctly. If you are using single-load doses of detergent, ignore this message. |
| Int | Cycle interrupted | Press the pause or cancel button twice. If the code does not clear, disconnect the washer for one minute. |
| rL, F34 | Items detected during a clean washer cycle | Remove the items from the basket and restart the cycle. |
| Sud, Sd | Excessive suds | This code will automatically clear as the washer takes additional time to clear the water and suds. Ensure you use the correct detergent and check the drain hose for any kinks or clogs. |
| F5 E2 | The Door is not locking properly | Ensure that there are no items blocking the door’s locking mechanism. |
| F7 E1 | Motor speed sensing error | Check for any remaining shipping bolts and ensure the washer load is not excessive. |
| F8 E1, LO FL | Low water flow | Check your home’s water system to ensure that the flow is functioning. If the flow rate is fine, make sure your water inlet hoses are not kinked or clogged. |
| F8 E2 | Dispenser system issue | Select models only. Ensure the detergent drawer or cartridge is not clogged with detergent. |
| F9 E1 | Excessive drain time | Make sure the drain hose is not clogged or kinked. |
| Other F# E# code | Other error | Disconnect the washer for one minute and reconnect it. If the code does not clear, contact a professional. |